In stock · Ships in 1–3 working days
3D Woven Structural Carbon Plate
A structural carbon plate whose layers do not separate, thanks to fibre woven through the thickness.
$614 (export price, no VAT)
Sample Kit
3 small rectangular plate pieces and a datasheet
Test the material in your hands first; the kit price is credited to your first order.
$41 (export price, no VAT)
Converted from the TL price at the TCMB forex selling rate (September 25, 2026).
- Ships in 1–3 working days
- Secure payment, e-invoice, NDA on request
Our products are made with OWC. What is OWC?
Highlights
- Three small rectangular pieces cut from a full plate for drilling, cutting and fastening trials.
- The pieces are the same material and 6.5 mm thickness as the plate on sale.
- Datasheet with mechanical values and machining notes.
Technical specifications
| Property | Value |
|---|---|
| Plate pieces | 3 × 80 × 30 × 6.5 mm (length × width × thickness) |
| Strong direction | Length (80 mm) |
| Grade | Tg140 (VARTM) |
| Document | Datasheet |
Mechanical values
| Property | Value |
|---|---|
| Tensile strength | 813–993 MPa |
| Flexural modulus | 94–107 GPa |
| Glass transition temperature (Tg) | 140 °C |
Ranges are test results on 3D woven RTM specimens. Verify them under your own load conditions before using them as design values.
Applications
Put together for engineering teams at the material selection stage.
- Checking behaviour around holes and at the edges
- Preliminary trials on your own test rig
- Material trials for university and Teknofest teams
- Purchasing and quality approval
Related articles
Machining guide
- Use a diamond-coated (PCD) or carbide composite router bit.
- Drill with a sharp carbide bit, a low feed rate and a backing board on the exit side.
- Because the layers do not separate, edges stay clean on CNC routers and waterjets.
- Use dust extraction and an FFP2 mask for carbon dust.
Full guide: Carbon plate CNC cutting guide
In the box
- 3 × small rectangular plate piece, length 80 mm (strong direction) × width 30 mm × 6.5 mm
- Datasheet
Frequently asked questions
How is the kit price credited?
On your first plate or cutting order after the kit, the kit price is deducted when the payment link is prepared.
Can I run tests on the pieces?
Yes. The pieces are cut from a full plate and suit drilling, cutting and fastening trials. If a standard mechanical test needs specific dimensions, upload your drawing and the composite cutting service cuts pieces to your size.
Related products
5 in 
Cut to order · Ships in 3–7 working days
5-Inch Drone Arm
226 mm wheelbase
An arm for 5-inch propellers in 3D woven carbon: the strength of a 2D carbon arm from a thinner, lighter part.
$103 (export price, no VAT)
7 in 
Cut to order · Ships in 3–7 working days
7-Inch Drone Arm
296 mm wheelbase
An arm for 7-inch propellers in 3D woven carbon: the strength of a 2D carbon arm from a thinner, lighter part.
$154 (export price, no VAT)
