5 in 
Cut to order · Ships in 3–7 working days
5-Inch Drone Arm
226 mm wheelbase
An arm for 5-inch propellers in 3D woven carbon: the strength of a 2D carbon arm from a thinner, lighter part.
Price on request
Request a quote
3D Woven Structural Carbon Plate
Reinforced in one direction, 500 × 250 × 6.5 mm
A structural carbon plate whose layers do not separate, thanks to fibre woven through the thickness.
$600 (export price, no VAT)
Converted from the TL price at the TCMB forex selling rate (November 5, 2026).
Order request
No payment is taken on the site; the proforma invoice is sent by email.
- Ships in 1–3 working days
- E-invoice, NDA on request
Our products are made with OWC. What is OWC?
Highlights
- Through-thickness fibre ties the layers together: cracks do not run from bolt holes, and wear under repeated loads is lower than in a 2D laminate.
- 30% higher strength along the OWC direction (500 mm edge) than 2D laminates: the same strength from a thinner, lighter part.
- Made by vacuum-assisted resin transfer moulding (VARTM); glass transition temperature (Tg) 140 °C.
Technical specifications
| Property | Value |
|---|---|
| Size | 500 × 250 mm |
| Thickness | 6.5 mm |
| Weight | ≈ 1.26 kg |
| Density | ≈ 1.60 g/cm³ |
| Fibre | Carbon |
| Weave | 3D orthogonal |
| Strong direction | 500 mm edge (most of the fibre runs along this axis) |
| Resin | Epoxy |
| Process | VARTM |
Mechanical values
| Property | Value |
|---|---|
| Tensile strength | 813–993 MPa |
| Flexural modulus | 94–107 GPa |
| Glass transition temperature (Tg) | 140 °C |
Ranges are test results on 3D woven RTM specimens. Verify them under your own load conditions before using them as design values.
Applications
The full plate for R&D teams that cut on their own CNC and prefer not to share their design. Suited to flat parts that carry load, vibration and impact.
- Defence and aerospace R&D prototypes
- Cinelifter and heavy-lift drone frames
- Frame and bracket parts for university and Teknofest teams
- Cargo and delivery prototypes
- Robot and machine carrier parts
Related articles
Machining guide
- Use a diamond-coated (PCD) or carbide composite router bit.
- Drill with a sharp carbide bit, a low feed rate and a backing board on the exit side.
- Because the layers do not separate, edges stay clean on CNC routers and waterjets.
- Use dust extraction and an FFP2 mask for carbon dust.
- Align load-bearing parts with the 500 mm axis when nesting.
Full guide: Carbon plate CNC cutting guide
In the box
- 1 × plate, 500 × 250 × 6.5 mm
- Edge-protected packaging
Frequently asked questions
Can you cut the plate to my drawing?
Yes. Your drawing is sent with a quote request from the Composite cutting page; the part is CNC-cut from the plate and shipped. The largest part size is 490 × 240 mm.
How are orders of 25 plates or more priced?
Orders of 25 plates or more are priced by quotation. State the quantity and the required delivery date in the quote request.
Related products
7 in 
Cut to order · Ships in 3–7 working days
7-Inch Drone Arm
296 mm wheelbase
An arm for 7-inch propellers in 3D woven carbon: the strength of a 2D carbon arm from a thinner, lighter part.
Price on request
Request a quote 12 in 
Cut to order · Ships in 3–7 working days
12-Inch Drone Arm
510 mm wheelbase
An arm for 12-inch propellers in 3D woven carbon: the strength of a 2D carbon arm from a thinner, lighter part.
Price on request
Request a quote